Category: Home Decor

Question:
gypsum board ceiling how to deal with the seams do not split?
emulsion paint is a spray do? Road to go through several processes?

Answer:
first exposed gong nail brush-off point with the anti-rust paint, then brush the joints of gypsum board on the white emulsion, paste inlay sealing tape, after drying, scraping the first Putty (gypsum putty), dry scraping second putty (talc putty), repeated three times so called “three Sozo Mody”, then check the bottom of putty to be a good flatness. check method is to use large bulb-shun shining on the wall, it was discovered with uneven strokes out of the office in order to allow workers to rework. checks good, clean the dust after the wall you can prepare a latex paint brush.
latex paint in three ways: brush, spray and roll, due to manufacturers of emulsion paint composition is different from the manner of its painting are not the same, it should be specific issues and problems, but usually the main roller (paint is not easy to brush flowers). require good quality paint something to say to paint it three times (each must be Zhaobu putty between times, and use sand pa…